EOL: DSA E-Series 2TB

DSA E-Series 2TB
  • Scale-out network storage solution: controller unit with 12 internal HDDs with up to 192 HDDs via state-of-the-art SAS interface-connected expansion units
  • Configurable hardware-based RAID protection (RAID‑5 or RAID‑6) for highest system performance
  • Redundant hot-swappable power supplies and cooling fans
  • Two 10 Gigabit Ethernet ports for highest speed iSCSI connectivity
  • Fully modular design for ease of service
  • Details
    Electrical requirements
    Parameter Low range , High range
    Nominal voltage 100 VAC , 240 VAC
    Frequency 50 to 60 Hz , 50 to 60 Hz
    Idle current 3.97 A , 1.63 A
    Maximum operating current 4.25 A , 1.68 A
    Sequential drive group spin up 4.27 A , 1.76 A
    Simultaneous drive spin up 6.13 A , 2.71 A
    System rating plate label 7.0 A , 2.9 A
    Power ratings
    KVA 0.400
    AC Watts 399
    BTU/h 1366
    Note: for detailed information please see the NetApp E‑Series Storage Systems Site Preparation Guide
    Battery data
    Number of batteries 2
    Battery type Li-ion
    Weight of battery 0.157 kg (0.346 lb)
    Battery casing Pack
    Battery group Accumulator
    System hardware specifications
    Chassis CE2600 controller-drive tray conforms to the 483 mm (19.0 in) rack standard
    Power supplies Dual redundant, hot pluggable
    Maximum disk drives 8 x 2 TB, 3.5”, Nearline SAS
    Maximum net capacity ~13000 GB (RAID‑5 configured)
    DDR2 memory (system RAM) 2 GB
    Integrated I/O 2 x 100 Mbps management port; 2 x 1/10 Gigabit Ethernet, copper
    Remote management (via LAN) Yes (plus serial console on dedicated port)
    Mechanical
    Dimensions (H x W x D)
    Controller-drive tray 86.4 x 482.6 x 552.5 mm (3.4 x 19 x 21.75 in)
    Shipping carton 241.3 x 584.2 x 685.8 mm (9.5 x 23 x 27 in)
    Weight
    Maximum weight 23 kg (55.72 lb )
    Maximum shipping weight 27.75 kg (61.2 lb)
    Space requirements
    Front—cooling 760 mm (30 in) clearance in front of the cabinet
    Rear—cooling 610 mm (24 in) clearance behind the cabinet
    Front of chassis—maintenance 760 mm (30 in) clearance in front of the cabinet
    Rear of chassis—maintenance 610 mm (24 in) clearance behind the cabinet
    Environmental
    Temperature
    Operating range (both cabinet and subsystem) +10 °C to +35 °C (+50 °F to +95 °F)
    Maximum rate of change 10 °C (50 °F) per hour
    Storage range -10 °C to +50 °C (+14 °F to +122 °F)
    Relative humidity (non-condensing)
    Operating range (both cabinet and subsystem) 20 to 80%
    Storage range 10 to 90%
    Acoustic noise
    Sound power (standby operation) 65 dB max
    Sound pressure (normal operation) 65 dBA max
    Electrical requirements
    Parameter Low range , High range
    Nominal voltage 100 VAC , 240 VAC
    Frequency 50 to 60 Hz , 50 to 60 Hz
    Idle current 3.97 A , 1.63 A
    Maximum operating current 4.25 A , 1.68 A
    Sequential drive group spin up 4.27 A , 1.76 A
    Simultaneous drive spin up 6.13 A , 2.71 A
    System rating plate label 7.0 A , 2.9 A
    Power ratings
    KVA 0.400
    AC Watts 399
    BTU/h 1366
    Note: for detailed information please see the NetApp E‑Series Storage Systems Site Preparation Guide
    Battery data
    Number of batteries 2
    Battery type Li-ion
    Weight of battery 0.157 kg (0.346 lb)
    Battery casing Pack
    Battery group Accumulator
    System hardware specifications
    Chassis CE2600 controller-drive tray conforms to the 483 mm (19.0 in) rack standard
    Power supplies Dual redundant, hot pluggable
    Maximum disk drives 12 x 2 TB, 3.5”, Nearline SAS
    Maximum net capacity ~20500 GB (RAID‑5 configured)
    DDR2 memory (system RAM) 2 GB
    Integrated I/O 2 x 100 Mbps management port; 2 x 1/10 Gigabit Ethernet, copper
    Remote management (via LAN) Yes (plus serial console on dedicated port)
    Mechanical
    Dimensions (H x W x D)
    Controller-drive tray 86.4 x 482.6 x 552.5 mm (3.4 x 19 x 21.75 in)
    Shipping carton 241.3 x 584.2 x 685.8 mm (9.5 x 23 x 27 in)
    Weight
    Maximum weight 24.9 kg (54.9 lb)
    Maximum shipping weight 29.65 kg (65.37 lb)
    Space requirements
    Front—cooling 760 mm (30 in) clearance in front of the cabinet
    Rear—cooling 610 mm (24 in) clearance behind the cabinet
    Front of chassis—maintenance 760 mm (30 in) clearance in front of the cabinet
    Rear of chassis—maintenance 610 mm (24 in) clearance behind the cabinet
    Environmental
    Temperature
    Operating range (both cabinet and subsystem) +10 °C to +35 °C (+50 °F to +95 °F)
    Maximum rate of change 10 °C (50 °F) per hour
    Storage range -10 °C to +50 °C (+14 °F to +122 °F)
    Relative humidity (non-condensing)
    Operating range (both cabinet and subsystem) 20 to 80%
    Storage range 10 to 90%
    Acoustic noise
    Sound power (standby operation) 65 dB max
    Sound pressure (normal operation) 65 dBA max
    Electrical requirements—expansion unit
    Parameter Low range , High range
    Nominal voltage 100 VAC , 240 VAC
    Frequency 50 to 60 Hz , 50 to 60 Hz
    Idle current 2.96 A , 1.23 A
    Maximum operating current 3.03 A , 1.26 A
    Sequential drive group spin up 4.23 A , 1.76 A
    Simultaneous drive spin up 4.43 A , 1.83 A
    System rating plate label 7.0 A , 2.9 A
    Power ratings—expansion unit
    KVA 0.276
    AC Watts 276
    BTU/h 954
    Note: for detailed information please see the NetApp E‑Series Storage Systems Site Preparation Guide
    System hardware specifications—expansion unit
    Chassis DE1600 controller-drive tray conforms to the 483 mm (19.0 in) rack standard
    Power supplies Dual redundant, hot pluggable
    Maximum disk drives 12 x 2 TB, 3.5”, Nearline SAS
    Maximum net capacity ~20500 GB (RAID‑5 configured)
    Integrated I/O 6 Gb SAS
    Mechanical—expansion unit
    Dimensions (H x W x D)
    Drive tray 86.4 x 482.6 x 552.5 mm (3.4 x 19 x 21.75 in)
    Shipping carton 241.3 x 584.2 x 685.8 mm (9.5 x 23 x 27 in)
    Weight
    Maximum weight 27 kg (59.52 lb)
    Maximum shipping weight 31.75 kg (70.0 lb)
    Space requirements
    Front—cooling 760 mm (30 in) clearance in front of the cabinet
    Rear—cooling 610 mm (24 in) clearance behind the cabinet
    Front of chassis—maintenance 760 mm (30 in) clearance in front of the cabinet
    Rear of chassis—maintenance 610 mm (24 in) clearance behind the cabinet
    Environmental—expansion unit
    Temperature
    Operating range (both cabinet and subsystem) +10 °C to +40 °C (+50 °F to +104 °F)
    Maximum rate of change 10 °C (50 °F) per hour
    Storage range -10 °C to +50 °C (+14 °F to +122 °F)
    Relative humidity (non-condensing)
    Operating range (both cabinet and subsystem) 20 to 80%
    Storage range 10 to 90%
    Acoustic noise
    Sound power (standby operation) 65 dB max
    Sound pressure (normal operation) 68 dB max

    Images

     

    Features

    iSCSI RAID5 RAID6
     
  • Certificates (3)
     
  • Documents (10)
     
  • Software Downloads (1)
     
 

Accessories

DSA-N2E6S8-ESW DSA-E Base 8x2TB, Wrty Ext 12 Mths

12-month warranty extension for DSA E‑Series base unit, 8 x 2 TB

Commercial Type No.: DSA-N2E6S8-ESW
Product No.: F.01U.278.650

 

DSA-N2E6S12-ESW DSA-E Base 12x2TB, Wrty Ext 12 Mths

12-month warranty extension for DSA E‑Series base unit, 12 x 2 TB

Commercial Type No.: DSA-N2E6S12-ESW
Product No.: F.01U.278.651

 
 

DSX-N1D6S12-ESW DSA-E Shelf 12x2TB, Wrty Ext 12 Mths

12-month warranty extension for DSA E‑Series expansion unit, 12 x 2 TB

Commercial Type No.: DSX-N1D6S12-ESW
Product No.: F.01U.278.652

 

DSA-N2E6S8-4PD DSA-E Base 8x2TB, 4hrs Prts DY 12 Mths

12-month parts delivery within 4 hours for DSA E‑Series base unit, 8 x 2 TB

Commercial Type No.: DSA-N2E6S8-4PD
Product No.: F.01U.278.646

 
 

DSA-N2E6S12-4PD DSA-E Base 12x2TB, 4hrs Prts DY 12 Mths

12-month parts delivery within 4 hours for DSA E‑Series base unit, 12 x 2 TB

Commercial Type No.: DSA-N2E6S12-4PD
Product No.: F.01U.278.647

 

DSX-N1D6S12-4PD DSA-E Shelf 12x2TB, 4hrs Prts DY 12 Mths

12-month parts delivery within 4 hours for DSA E‑Series expansion unit, 12 x 2 TB

Commercial Type No.: DSX-N1D6S12-4PD
Product No.: F.01U.278.649

 
 

DSA-N2E6S8-4PR DSA-E Base 8x2TB,4hrs Prts Repl 12 Mths

12-month parts replacement within 4 hours for DSA E‑Series base unit, 8 x 2 TB

Commercial Type No.: DSA-N2E6S8-4PR
Product No.: F.01U.278.659

 

DSA-N2E6S12-4PR DSA-E Base 12x2TB,4hrs Prts Repl 12 Mths

12-month parts replacement within 4 hours for DSA E‑Series base unit, 12 x 2 TB

Commercial Type No.: DSA-N2E6S12-4PR
Product No.: F.01U.278.660

 
 

DSX-N1D6S12-4PR DSA-E Shelf 12x2TB,4hrs Prts Rep 12 Mths

12-month parts replacement within 4 hours for DSA E‑Series expansion unit, 12 x 2 TB

Commercial Type No.: DSX-N1D6S12-4PR
Product No.: F.01U.278.661

 

DSA-N2E6S8-NRD DSA-E Base 8x2TB, NonRet DO 12 Mths

12-month non-returnable disk option for DSA E‑Series base unit, 8 x 2 TB

Commercial Type No.: DSA-N2E6S8-NRD
Product No.: F.01U.278.800

 
 

DSA-N2E6S12-NRD DSA-E Base 12x2TB, NonRet DO 12 Mths

12-month non-returnable disk option for DSA E‑Series base unit, 12 x 2 TB

Commercial Type No.: DSA-N2E6S12-NRD
Product No.: F.01U.278.801

 

DSX-N1D6S12-NRD DSA-E Shelf 12x2TB, NonRet DO 12 Mths

12-month non-returnable disk option for DSA E‑Series expansion unit, 12 x 2 TB

Commercial Type No.: DSX-N1D6S12-NRD
Product No.: F.01U.278.802