AUTODOME Series Mounts and Accessories

AUTODOME Series Mounts and Accessories
  • 24 VAC, 120 VAC, and 230 VAC power supply boxes
  • Pendant Wall, Corner, Mast, Roof, and Pipe mounts
  • In-ceiling support kits for suspended ceilings and for IP54 certification
  • Analog and IP Fiber Optic Communication Units
  • Rugged polycarbonate, IK10-rated nylon, and high-resolution acrylic replacement bubbles
  • Details
    Dimensions
    Indoor Pendant Mounts1 (W x H x D)
    VGA-PEND-ARM 169.5 x 366.4 x 460.1 mm (6.67 x 14.43 x 18.12 in.)
    Outdoor Pendant Mounts1 (W x H x D)
    VGA-PEND-ARM 224.0 x 366.4 x 477.6 mm (8.82 x 14.43 x 18.8 in.)
    Pendant Mount Accessories
    VGA-PEND-WPLATE(W x H) 169.5 x 216.4 mm (6.67 x 8.52 in.)
    VG4-A-9541(W x H x D) 175.0 x 183.0 x 58.9 mm (6.9 x 7.6 x 2.3 in.)
    VG4-A-9542(W x H x D) 219.1 x 236.0 x 216.4 mm (6.83 x 9.3 x 5.25 in.)
    VGA-ROOF-MOUNT(W x H) 1,022.4 x 1,190.8 mm (40.25 x 46.88 in.)
    LTC 9230/01(W x H) 254.0 x 254.0 mm (10.0 x 10.0 in.)
    1. Dimensions include the mount and the connected pendant housings.
    Model Input , Output Rating , Input Fuses , Output Fuses
    Camera Heater
    VG4-A-PSU0 24 VAC, 50/60 Hz , 24 V @ 96 VA , 5.0 A , 2.0 A , 3.15 A
    VG4-A-PSU1 120 VAC, 50/60 Hz , 24 V @ 96 VA , 1.6 A , 2.0 A , 3.15 A
    VG4-A-PSU2 230 VAC, 50/60 Hz , 24 V @ 96 VA , 0.8 A , 2.0 A , 3.15 A
    Mechanical
    Certifications UL, CE, Plenum Rated
    Dimensions (W x H x D),all models2 170.0 x 216.4 x 105.0 mm (6.69 x 8.52 x 4.13 in.)
    Construction Material Cast Aluminum
    Standard Color White (RAL9003)
    Standard Finish Powder coated, sand finish
    2. Dimensions for power supplies include the cover.
    Environmental
    Operating Temperature –60°C to 55°C (–76°F to 131°F)
    Humidity 0% to 100%, condensing
    Environmental Protection IP66, IK 8 (IEC 62262)
    VGA-FIBER-AN
    Description Multimode Fiber Optic Module
    Compatible Receiver LTC 4629 Series
    Optical Fiber Compatibility 50/125 µm, 62.5/125 µm, low loss multimode glass fiber, rated for a minimum system bandwidth of 20 MHz
    Max. Distance 4.0 km (2.5 miles)
    Optical Budget 14 dB
    Connector One (1) ST connector
    Wavelength (video/data) 850 nm / 1310 nm
    VG4-SFPSCKT
    Description Fiber Optic Ethernet Media Converter kit.Requires a small form-factor pluggable (SFP) module (sold separately).
    Data Interface Ethernet
    Data Rate 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port
    Compatible Receiver CNFE2MC/IN
    Installation Installed inside a VG4-A-PA1, VG4-A-PA2, VG4-A-PSU1 or a VG4-A-PSU2 power supply box, or in a MIC IP PSU, with supplied mounting hardware. Note: Wiring for the VG4-SFPSCKT must be routed through the proper conduit opening on the power supply box. Refer to the installation guide that accompanies the module.
    Operating Temperature -40 °C to +50 °C(-40 °F to +122 °F)
    SFP Modules
    Description Interchangeable modules available for use with MMF or SMF optical fiber.
    Data Interface Ethernet
    Data Rate 10/100 Mbps IEEE 802.3 Compliant
    Mechanical
    Dimensions (W x H x D)
    SFP-2 and SFP-3 13.5 x 8.5 x 55.5 mm (0.5 x 0.3 x 2.2 in.)
    SFP-23, SFP-24, SFP-25, SFP-26 13.5 x 8.5 x 63.8 mm (0.5 x 0.3 x 2.5 in.)
    Weight (all SFP modules) 0.23 kg (.05 lb)
    Type Connector , Wavelength (transmit/receive) , Max. Distance
    SFP-2 MMF , Duplex LC , 1310 nm / 1310 nm , 2 km (1.2 miles)
    SFP-3 SMF , Duplex LC , 1310 nm / 1310 nm , 20 km(12.4 miles)
    SFP-25 MMF , Single SC , 1310 nm / 1550 nm , 2 km(1.2 miles)
    SFP-26 MMF , Single SC , 1550 nm / 1310 nm , 2 km(1.2 miles)
    Fiber Compatibility
    Optical Fiber Compatibility, MMF 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651.
    Optical Fiber Compatibility, SMF 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652.
    Optical Distance Specifications Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.
    Construction material Nylon
    Size ⌀ 181.80
    External Mechanical Impact (IK Code or Impact rating) IK10
    UV Rating for Sunlight F1
    Reference Description
    1 Wall Mount – Side with power supply
    1a Wall/Mast Mount – Side with VGA-PEND-WPLATE
    2 Wall Mount – Front with power supply and trim skirt
    2a Wall Mount – Front with power supply
    3 Wall Mount – Back with power supply and trim skirt
    3a Wall Mount – Back with power supply
    4 Pipe Mount
    5 In-ceiling Mount – Front
    6 In-ceiling Mount – Side
    Reference Description
    1 Wall Mount – Side with power supply and trim skirt
    1a Wall/Mast Mount – Side with VGA-PEND-WPLATE
    2 Wall Mount – Front with power supply and trim skirt
    2a Wall Mount – Front with power supply
    3 Wall Mount – Back with power supply and trim skirt
    3a Wall Mount – Back with power supply
    4 Pipe Mount
    5 Mast (Pole) Mount Adapter
    6 Corner Mount Adapter
    7 Roof Mount
    8 Roof Mount Adapter
    9 Power Supply for Pipe and Roof Mounts

    Images

     
  • Certificates (1)
    Title Type Language
    Declaration of Conformity PDF
     
  • Documents (15)
     
 

Product variants

VGA-PEND-ARM Pendant arm with wiring, for AUTODOME

Compatible with an AutoDome Series pendant housing

Commercial Type No.: VGA-PEND-ARM@1
Product No.: F.01U.247.810;F.01U.261.947

 
VGA-PEND-WPLATE Mounting plate for VGA-PEND-ARM

Mounting plate for VGA-PEND-ARM, compatible with an AutoDome Series camera

Commercial Type No.: VGA-PEND-WPLATE
Product No.: F.01U.247.809

 
 
VGA-ROOF-MOUNT Roof parapet mount for AUTODOME series

Roof parapet mount, white

VG5-6xx/7xxx cameras require VG4-A-9543 Pipe Mount (sold separately).

NEZ-5130-/NEZ-5230- cameras require NDA-ADPTR-NPTMET (sold separately)

Commercial Type No.: VGA-ROOF-MOUNT
Product No.: F.01U.247.811

 
VG4-A-9541 Pole mount adapter

Pole mount adapter for an AUTODOME pendant arm or a DINION imager, designed for poles with a diameter of 100‑380 mm (4‑15 in.), white

Commercial Type No.: VG4-A-9541
Product No.: F.01U.123.433

 
 
VG4-A-9542 Corner mount adapter for AUTODOME

Corner mount adapter for an AUTODOME pendant arm or a DINION imager

Commercial Type No.: VG4-A-9542
Product No.: F.01U.123.434

 
VG4-A-9543 Pipe mount for AUTODOME , white

Pipe mount, white, for an AutoDome Series pendant housing

Commercial Type No.: VG4-A-9543
Product No.: F.01U.009.673

 
 
VGA-IP54K-IC In-ceiling IP54 kit for AUTODOME

Gasket kit for AutoDome 100 and 600 Series, AutoDome In-ceiling mounts required for IP54 environmental rating.

Commercial Type No.: VGA-IP54K-IC
Product No.: F.01U.218.804

 
VGA-IC-SP Suspended ceiling support kit,7"

Suspended ceiling support kit for dome cameras. Aperture Ø177 mm (Ø7 in). Maximum supported weight 11.3 kg (25 lb).

Commercial Type No.: VGA-IC-SP
Product No.: F.01U.245.271

 
 
VG4-A-PA0 Pendant arm, power box, 24VAC, AUTODOME

Pendant arm mount with power supply box for an AUTODOME Series camera, no transformer, white

Commercial Type No.: VG4-A-PA0@1
Product No.: F.01U.009.671;F.01U.081.560;F.01U.096.637;F.01U.097.435;F.01U.261.373

 
LTC 9230/01 Roof mount adapter

Flat Roof Mount Adapter for mounting a unit in an upright position on a flat surface.

Commercial Type No.: LTC 9230/01
Product No.: F.01U.503.630

 
 
VGA-BUBBLE-CCLR Bubble, in-ceiling, clear, rugged

Impact resistant polycarbonate bubble

Commercial Type No.: VGA-BUBBLE-CCLR
Product No.: F.01U.247.813

 
VGA-BUBBLE-CCLA Bubble, in-ceiling, clear

Low-impact acrylic bubble

Commercial Type No.: VGA-BUBBLE-CCLA
Product No.: F.01U.283.402

 
 
VGA-BUBBLE-CTIR Bubble, in-ceiling, tinted, rugged

Impact resistant polycarbonate bubble

Commercial Type No.: VGA-BUBBLE-CTIR
Product No.: F.01U.247.815

 
VGA-BUBBLE-CTIA Bubble, in-ceiling, tinted

Low-impact acrylic bubble

Commercial Type No.: VGA-BUBBLE-CTIA
Product No.: F.01U.283.403

 
 
VGA-BUBBLE-PCLR Bubble, pendant, clear, rugged

Impact resistant polycarbonate bubble

Commercial Type No.: VGA-BUBBLE-PCLR
Product No.: F.01U.247.817

 
VGA-BUBBLE-PCLA Bubble, pendant, clear

Low-impact acrylic bubble

Commercial Type No.: VGA-BUBBLE-PCLA
Product No.: F.01U.247.818

 
 
VGA-BUBBLE-PTIR Bubble, pendant, tinted, rugged

Impact resistant polycarbonate bubble

Commercial Type No.: VGA-BUBBLE-PTIR
Product No.: F.01U.247.819

 
VGA-BUBBLE-PTIA Bubble, pendant, tinted

Low-impact acrylic bubble

Commercial Type No.: VGA-BUBBLE-PTIA
Product No.: F.01U.247.820

 
 
VGA-BUBLRG-CCLA Bubble, in-ceiling, large, clear

High-resolution bubble for AUTODOME in-ceiling cameras, clear

Commercial Type No.: VGA-BUBLRG-CCLA
Product No.: F.01U.283.457

 
VGA-BUBLRG-CTIA Bubble, in-ceiling, large, tinted

High-resolution bubble for AUTODOME in-ceiling cameras, tinted

Commercial Type No.: VGA-BUBLRG-CTIA
Product No.: F.01U.283.404

 
 
VGA-BUBHD-CCLA Bubble, in-ceiling, clear

High-resolution acrylic bubble for AUTODOME HD in-ceiling cameras, clear

Commercial Type No.: VGA-BUBHD-CCLA
Product No.: F.01U.281.737

 
VGA-BUBHD-CTIA Bubble, in-ceiling, tinted

High-resolution acrylic bubble for AUTODOME HD in-ceiling cameras, tinted

Commercial Type No.: VGA-BUBHD-CTIA
Product No.: F.01U.281.738

 
 
VGA-BUBBLE-IK10 Bubble, pendant, IK10-rated

IK10-rated bubble qualified for use with AUTODOME 7000 HD cameras with pendant housings

Commercial Type No.: VGA-BUBBLE-IK10
Product No.: F.01U.315.882

 
VGA-SBOX-COVER Cover for AUTODOME power supply box

Cover for AUTODOME Power Supply Boxes, white

Commercial Type No.: VGA-SBOX-COVER
Product No.: F.01U.010.505;F.01U.247.808

 
 
 
 

Accessories

EWE-VG4PA2-IW 12mths wrty ext VG4-A-

EWE-VG4PA2-IW 12mths wrty ext VG4-A-

12 months warranty extension

Commercial Type No.: EWE-VG4PA2-IW
Product No.: F.01U.346.349

 
EWE-VG4PS2-IW 12mths wrty ext VG4-A-PSu2

EWE-VG4PS2-IW 12mths wrty ext VG4-A-PSu2

12 months warranty extension

Commercial Type No.: EWE-VG4PS2-IW
Product No.: F.01U.346.348