LTC 8900 Series Allegiant Matrix/Control Systems - Modular

LTC 8900 Series Allegiant Matrix/Control Systems - Modular
  • 4096 Camera by 512 monitor switching
  • Modular construction
  • Powerful alarm handling capabilities
  • SalvoSwitching and SatelliteSwitch capability
  • Includes Windows-based configuration software
  • Two-digit site plus 4-digit camera ID mode
  • Includes system controller PC and LCD monitor
  • Preloaded programming and diagnostic software
  • Dual/redundant CPU/power supply
  • Overview
    Capacities
    Video Inputs
    Standard 4096
    Satellite Configuration 6144
    Video Outputs 512
    Keyboards 120
    Alarm Inputs 1024
    Receiver/Drivers
    Standard 4096
    Satellite Configuration 6144
    Input Voltage Level 0.5 Vp-p to 2 Vp-p (composite negative sync)
    Gain Unity ± 2% (75 Ohm terminated)
    Pulse/Bar Ratios1 Min. , Nom. , Max.
    94% 98% , 106%
    2T Pulse K Factor1 Min. , Nom. , Max.
    0.2% 2.5%
    Bar Amplitude (IRE) 1 Min. , Nom. , Max.
    96 98 , 104
    Sync Amplitude (% Bar) 1 Min. , Nom. , Max.
    36% 39% , 44%
    Field Time Waveform Distortion1 2% maximum
    Line Time Waveform Distortion1 1% maximum
    Short Time Waveform Distortion1 2% maximum
    Long Time Waveform Distortion1 0.8% maximum
    Video Bandwidth (-3 dB) 17 MHz
    Frequency Response ± 0.5 dB to 11 MHz
    Signal-to-Noise-Ratio1 70 dB at 3.58 MHz unified unweighted minimum
    Crosstalk (at 3.58 MHz) Typical: –65 dB, Adjacent channel: –45 dB (typical)
    Hum 60 dB below the composite 1 Vp-p video signal from 60 Hz to 6 MHz
    Differential Gain1 Min. , Nom. , Max.
    0.6% 2%
    Differential Phase1 Min. , Nom. , Max.
    0.6° 1.3°
    Chrominance Luminance Gain Min. , Nom. , Max.
    94% 100% , 109%
    Chrominance Luminance Delay1 Min. , Nom. , Max.
    –33 ns +3 ns , +33 ns
    Luminance Nonlinearity1 Min. , Nom. , Max.
    0.3% 4%
    Switching Crosspoint matrix
    DC Output 0 V
    Transient Protection (VIM Cards) 350 W Peak Pulse Power (tp = 8/20 µs
    1 Meets EIA/TIA - 250C Medium Haul Standard for 1024 cameras x 64 monitors.
    Temperature
    Operating 4°C to 50°C (40°F to 122°F)
    Storage –40°C to 60°C (–40°F to 140°F)
    Altitude 4500 m (15,000 ft)
    Humidity 0 to 95 % relative, non-condensing
    Vibration 3 g swept sine wave, 15 Hz to 2000 Hz
    Shock 50 g, 11 m/s, ½ sine wave
    The LTC 8904/60 and LTC 8904/50 include the equipment rack, LTC 8910/01 microprocessor module, LTC 8905/90 power supply, and LTC 8917/00 relay module.
    Model No. Rated Voltage , Voltage Range , Nominal Power2
    LTC 8904/60 120 VAC, 50/60 Hz , 100 to 140 , 30 W
    LTC 8904/50 220–240 VAC, 50/60 Hz , 198 to 264 , 30 W
    2 Power at rated voltage fully loaded.
    Connectors
    Controller Port 9-pin D-type RS-232 port for an external PC or computing device (default = 115,200 baud)
    Console 9-pin D-type RS-232 port for an external computer or a computing device (default = 19,200 baud)
    Alarm 9-pin D-type RS-232 port for an Allegiant alarm accessory unit (default = 19,200 baud)
    Bi-Phase 9-pin D-type TTL level, high-speed control data output (BiPhase) for interface to an Allegiant series signal distribution units (data clock rate = 31.25 kHz)
    COM Ports Two 9-pin D-type RS-485 ports for an external Allegiant accessory use
    Keyboards Eight (8), 6-pin RS-485 ports for an Allegiant keyboard use (default = 9600 baud)
    LAN RJ-45 high-speed LAN port for interface to LTC 8902 Series and LTC 8903 Series bays via LTC 8946 Series LAN switches
    Equipment Rack
    Dimensions(W x D x H) EIA 48 cm (19 in.) rack, 440 x 394 x 86 mm (17.3 x 15.5 x 3.4 in.)
    Weight 7.2 kg (15.85 lb)
    Construction Metal case with plastic panel
    Finish Charcoal
    Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.5 kg (1.1 lb)
    Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Front Panel Indicators Power, CPU activity
    The LTC 8901/60 and LTC 8901/50 include the equipment rack, dual LTC 8910/01 microprocessor modules, dual LTC 8905/90 power supplies, and one LTC 8917/00 relay module.
    Model No. Rated Voltage , Voltage Range , Nominal Power3
    LTC 8901/60 120 VAC, 50/60 Hz , 100 to 140 , 30 W
    LTC 8901/50 220–240 VAC, 50/60 Hz , 198 to 264 , 30 W
    3 Power at rated voltage fully loaded.
    Connectors
    Controller Ports Two (2), RS-232 ports for an LTC 8943 PC controller interface (default = 115,200 baud)
    Console RS-232 port for an external computer or a computing device (default = 19,200 baud)
    Alarm RS-232 port for an Allegiant alarm accessory unit (default = 19,200 baud)
    Switch Ctrl Digital interface port for the LTC 8943 PC controller
    Bi-Phase TTL level, hi-speed control data output (Bi-Phase) for interface to an Allegiant series signal distribution units (data clock rate = 31.25 kHz)
    COM Ports Two (2), RS-485 port for an external Allegiant accessory use
    Keyboards Eight (8), 6-pin RS-485 ports for an Allegiant keyboard use (default = 9600 baud)
    LAN Two RJ-45 high-speed LAN ports for interface to LTC 8902 Series and LTC 8903 Series bays via LTC 8944 Series and LTC 8945 Series LAN Switches
    Equipment Rack
    Dimensions(W x D x H) EIA 48 cm (19 in.) rack, 440 x 394 x 86 mm (17.3 x 15.5 x 3.4 in.)
    Weight 8 kg (17.6 lb)
    Construction Metal case with plastic panel
    Finish Charcoal
    Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.5 kg (1.1 lb)
    Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Front Panel Indicators
    LTC 8901Primary power Primary faultBack-up powerBack-up faultPrimary CPU in-useController activityBack-up CPU in-useAuto-select modePrimary CPU activityFault buzzerBack-up CPU activityLTC 8904PowerCPU Activity
    Rear Panel Indicators
    Relay outputs4Primary CPU faultBack-up power supply failureBack-up CPU fault Any failurePrimary power supply failure
    4 Relay Contacts: 24 VAC, 40 V peak, 1 A.
    The LTC 8902/60 and LTC 8902/50 include the equipment rack, LTC 8916/01 data receiver module, and LTC 8906 Series power supply.
    Model No. Rated Voltage , Voltage Range , Nominal Power5
    LTC 8902/60 120 VAC, 50/60 Hz , 100 to 140 , 160 W
    LTC 8902/50 220–240 VAC, 50/60 Hz , 198 to 264 , 160 W
    5 Power at rated voltage fully loaded.
    Connectors
    Video Outputs Four (4), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
    Video Bus Connections Sixteen (16), 34-pin ribbon connectors interconnect with LTC 8903 Series Camera Input bays using LTC 8809/00 ribbon cables
    Console Port reserved for future use
    COM 1 Port reserved for future use
    COM 2 Port reserved for future use
    EXT Sync BNC input used to synchronize the unit to an external sync signal. Accepts composite video, composite sync, or the V Sync output provided from another LTC 8900 Series matrix bay
    V Sync BNC connector provides an output signal to synchronize an additional LTC 8900 Series matrix bay via its EXT Sync input
    External Data Interface Two (2), RJ-45 high-speed LAN ports for interface to the LTC 8901 Main CPU bay via system LAN Switches. (Connected in parallel; one is used, one is reserved for future use)
    Equipment Rack
    Dimensions(W x D x H) EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
    Weight 11.1 kg (24.5 lb)
    Construction Metal cabinet
    Finish Charcoal
    Dimensions(W x D x H) EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
    Weight 0.5 kg (1.1 lb)
    Dimensions(W x D x H) 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
    Weight 5.2 kg (11.5 lb)
    Indicators Power On/Off and fuse alert LEDs
    The LTC 8903/60 and LTC 8903/50 include the equipment rack, LTC 8918/01 data receiver module, and LTC 8805 Series power supply.
    Model No. Rated Voltage , Voltage Range , Nominal Power6
    LTC 8903/60 120 VAC, 50/60 Hz , 100 to 140 , 85 W
    LTC 8903/50 220–240 VAC, 50/60 Hz , 198 to 264 , 85 W
    6 Power at rated voltage fully loaded.
    Connectors
    Video Inputs Sixteen (16), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
    Looping Video Input Connections Sixteen (16), 34-pin ribbon connectors used with LTC 8809/00 ribbon cables (supplied as required to loop to additional LTC 8903 Series bays)
    Video Bus Connections Four (4), 34-pin ribbon connectors interconnect with LTC 8903 Series camera input bays using LTC 8809/00 ribbon cables
    Console Port reserved for future use
    COM 1 Port reserved for future use
    COM 2 Port reserved for future use
    EXT SYNC BNC input used to synchronize unit to external sync signal; accepts composite video, composite sync, or the V Sync output provided from another LTC 8900 Series matrix bay
    V SYNC BNC connector provides output signal to synchronize an additional LTC 8900 Series matrix bay via its EXT Sync input
    External Data Interface Two (2), RJ-45 high-speed LAN ports for interface to LTC 8901 main CPU bay via system LAN Switches (Connected in parallel; one is used, one is reserved for future use)
    Equipment Rack
    Dimensions(W x D x H) EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
    Weight 11.1 kg (24.5 lb)
    Construction Metal cabinet
    Finish Charcoal
    Dimensions(W x D x H) EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
    Weight 0.5 kg (1.1 lb)
    Size(W x D x H) 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
    Weight 5.2 kg (11.5 lb)
    Indicators Power On/Off and fuse alert LEDs
    Use up to sixteen per LTC 8903 Series camera input bays.
    Camera Inputs 32
    Size(D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.41 kg (0.9 lb)
    Use up to eight per LTC 8902 Series monitor output bays.
    Monitor Outputs 8
    Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.41 kg (0.9 lb)
    (Redundant System Configurations Only)
    Includes LTC 8943/94 PC, LTC 8944/93 Primary LAN Switch and LTC 8945/93 Backup LAN Switch
    LTC 8943/94 PC Rack-mount industrial-grade Pentium PC, 512 MB RAM (minimum), 8 GB solid state hard drive (minimum), CD-/DVD burner, floppy drive, keyboard, mouse, keyboard/mouse rack-mount shelf, and Windows XP Professional; 120/230 VAC, 50/60 Hz
    LTC 8059/00 Allegiant Master Control software (installed on PC)
    Monitor(UML-191-90) 48.3 cm (19 in.) LCD panel 120/230 VAC, 50/60 Hz
    Monitor Rack(UMM-LCDUB-RM) Racked Height: 37.4 cm (14.7 in.) Racked Width: 48.3 cm (19.0 in.)
    LTC 8944/93 Primary LAN Switch 24-port 10/100Base-T Ethernet Switch with SNMP Module, programmed with primary IP Address; 120/220 VAC, 50/60 Hz
    LTC 8945/93 Back-Up LAN Switch 24-port 10/100Base-T Ethernet Switch with SNMP Module, programmed with back-up IP Address; 120/220 VAC, 50/60 Hz
    24-port 10/100BaseT Ethernet Switch, no SNMP module; 120/220 VAC, 50/60 Hz
    The LTC 8808/00 assembly contains an interconnect panel which is used to convert 32 BNC connectors into two 16-channel ribbon cable connectors. The two (2) coaxial ribbon cables (LTC 8809/00), designed especially for use with video signals, and are then used to interconnect the video between the panel and the LTC 8900 system. Use of the LTC 8808/00 assemblies are required for all external video input and output connections. In addition to being used for video inputs and monitor outputs, the LTC 8808/00 assembly is also used to provide looping capability. One (1) LTC 8808/00 (includes panel and two ribbon cables) is required for each group of 32 system cameras or 32 monitors.
    Dimensions (W x D x H) EIA 48 cm (19 in.) rack, 483 x 42 x 44 mm (19 x 1.65 x 1.75 in.)
    Weight
    Panel 0.54 kg (1.2 lb)
    Ribbon Cables Two (2), 0.3 kg (0.7 lb)
    Construction Metal
    Finish Charcoal
    The LTC 8900 Series accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboard extension kits, Allegiant Bilinx Data Interface unit, receiver/driver units, switcher/followers, code merger units, video ribbon cables, and keyboard expansion units. All accessory products are designed to be installer-friendly and compatible throughout the Allegiant series systems. See the Allegiant Accessories datasheet.

    Images

     
  • Certificates (2)
     
  • Documents (24)
     
  • Software & Support (1)
    Title Type Language
    Allegiant Software Updates MHT
     
 

Product variants

LTC 8901/50 ALLEGIANT LTC 8901 DUAL CPU BAY, 230VAC

Dual CPU bay, 230 VAC

Commercial Type No.: LTC 8901/50
Product No.: F.01U.503.571

 
LTC 8901/60 ALLEGIANT LTC 8901 DUAL CPU BAY, 120VAC

Dual CPU bay, 120 VAC

Commercial Type No.: LTC 8901/60
Product No.: F.01U.503.572

 
 
LTC 8904/50 ALLEGIANT LTC 8904 CPU BAY, 230VAC

CPU bay, 230 VAC

Commercial Type No.: LTC 8904/50
Product No.: F.01U.503.577

 
LTC 8904/60 ALLEGIANT LTC 8904 CPU BAY, 120VAC

CPU bay, 120 VAC

Commercial Type No.: LTC 8904/60
Product No.: F.01U.503.578

 
 
LTC 8905/90 REP POWER SUPPLY, 8901 & 8904 120/240V

for LTC 8901 and LTC 8904 Series, 120/240 VAC

Commercial Type No.: LTC 8905/90
Product No.: F.01U.503.579

 
LTC 8906/50 REP POWER SUPPLY, LTC 8902/50, 230VAC

for LTC 8902/50, 230 VAC

Commercial Type No.: LTC 8906/50
Product No.: F.01U.503.580

 
 
LTC 8906/60 REP POWER SUPPLY, LTC 8902/60, 120VAC

for LTC 8902/60, 120 VAC

Commercial Type No.: LTC 8906/60
Product No.: F.01U.503.581

 
LTC 8910/01 REP CPU MODULE, LTC 8901 & 8904 SERIES

CPU module for LTC 8901 and LTC 8904 Series

Commercial Type No.: LTC 8910/01
Product No.: F.01U.012.220

 
 
LTC 8917/00 REP RELAY MODULE FOR LTC 8901 SERIES

for LTC 8901 Series

Commercial Type No.: LTC 8917/00
Product No.: F.01U.503.584

 
LTC 8921/00 VIDEO INPUT MODULE FOR LTC 8900 SERIES

for LTC 8900 Series

Commercial Type No.: LTC 8921/00
Product No.: F.01U.503.586

 
 
LTC 8934/00 VIDEO OUTPUT MODULE FOR LTC 8900 SERIES

for LTC 8900 Series

Commercial Type No.: LTC 8934/00
Product No.: F.01U.503.587

 
 
 

Accessories

LTC 8944/93 PGM'D 24-PORT 'PRIMARY' LAN SW, FOR 8900

Commercial Type No.: LTC 8944/93
Product No.: F.01U.167.556

 

LTC 8945/93 PGM'D 24-PORT 'BACKUP' LAN SW, FOR 8900

Commercial Type No.: LTC 8945/93
Product No.: F.01U.167.557

 
 

LTC 8946/93 BASIC 24-PORT EXPANSION LAN SW, FOR 8900

Commercial Type No.: LTC 8946/93
Product No.: F.01U.167.558

 
LTC 8059/00 ALLEGIANT MASTER CONTROL SOFTWARE

LTC 8059/00 ALLEGIANT MASTER CONTROL SOFTWARE

Commercial Type No.: LTC 8059/00
Product No.: 4.998.138.357