EOL: LTC 8600 Series Allegiant Matrix/Control Systems - Modular

LTC 8600 Series Allegiant Matrix/Control Systems - Modular
  • 128 Camera by 16 monitor switching
  • Modular construction
  • Powerful alarm handling capabilities
  • SalvoSwitching and SatelliteSwitch capability
  • PC-based software package available
  • Economical single-bay design
  • Two-digit site plus 4-digit camera ID mode
  • Overview
    Capacities
    Video Inputs Standard: 128 Satellite configuration: 1024
    Video Outputs 16
    Keyboards 16
    Alarm Inputs 512
    Receiver/Drivers Standard: 128 Satellite configuration: 1024
    Video Bandwidth (-3 dB) 12 MHz typical
    Differential Gain 1% maximum
    Differential Phase 2° maximum
    K Factor 0.5%
    Signal-to-Noise Ratio 70 dB minimum
    Crosstalk (Input to Input Isolation) –50 dB typical
    Feedthrough (Input to Output Isolation) 45 dB typical
    Gain Unity ± 2% (into 75 Ohm termination)
    Tilt 1% typical
    Transient Protection (VIM Cards) 350 W Peak Pulse Power (tp = 8/20 µs)
    Temperature
    Operating 4°C to 50°C (40°F to 122°F)
    Storage –40°C to 60°C (–40°F to 140°F)
    Altitude 4500 m (15,000 ft)
    Humidity 0% to 95% relative, non-condensing
    Vibration 3 g swept sine wave, 15 Hz to 2000 Hz
    Shock 50 g, 11 ms, 1/2 sine wave
    Includes equipment rack, LTC 8610/01 microprocessor module, and LTC 8805 Series power supply.
    Power
    Model No. Rated Voltage , Voltage Range , Nominal Power1
    LTC 8601/60 120 VAC, 50/60 Hz , 100 to 140 , 200 W
    LTC 8601/50 220–240 VAC, 50/60 Hz , 198 to 264 , 200 W
    1. Power at rated voltage fully loaded.
    Connectors
    Video Inputs 1 to 96 One (1) sync input, and 16 monitor outputs, BNC
    Video Connections 97 to 128 Two (2), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
    Looping Video Connections 1-128 Eight (8), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
    Connectors
    CONSOLE 9-pin D-type RS-232 port for external PC or control interface (Default = 19.2 k baud)
    ALARM 9-pin D-type RS-232 port for Allegiant alarm accessory unit (Default = 19.2 k baud)
    PRINTER 9-pin D-type RS-232 port for system logging printer (Default = 19.2 k baud)
    SDA 9-pin D-type, TTL level, hi-speed control data output (Bi-Phase) for interface to Allegiant series signal distribution units (Data clock rate = 31.25 kHz)
    COM PORT 1 9-pin D-type RS-485 port for external Allegiant accessory use
    COM PORT 2 9-pin D-type RS-485 port for external Allegiant accessory use
    KEYBOARDS Eight (8), 6-pin RS-485 ports for Allegiant keyboard use
    Size (W x D x H) EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
    Weight 11.1 kg (24.5 lb)
    Construction/Finish Top and bottom: steel front and sides back: aluminum
    Finish Charcoal
    Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.5 kg (1.1 lb)
    (LTC 8805/60–120 VAC, LTC 8805/50–220-240 VAC)
    Size (W x D x H) 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
    Weight 5.2 kg (11.5 lb)
    Indicators One power On/Off, ten fuse alert, and one external sync LED
    Use up to eight (8) per equipment bay.
    Camera Inputs 16
    Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.41 kg (0.9 lb)
    Use up to (4) four per equipment bay.
    Monitor Outputs 4
    Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.41 kg (0.9 lb)
    The LTC 8808/00 assembly contains an interconnect panel is used to convert 32 BNC connectors into two 16-channel ribbon cable connectors. The two 16-conductor ribbon cables (LTC 8809/00), designed especially for use with video signals, are used to interconnect the video between the panel and the LTC 8600 Series system. One LTC 8808/00 assembly is included at time of shipment and is required for system video inputs 97 to 128. In addition to being used for video inputs 97 to 128, the LTC 8808/00 assembly can also be ordered as an option to provide looping capability. One LTC 8808/00 (includes panel and two, ribbon cables) is required for each group of 32 cameras.
    Finish Charcoal
    Size (W x D x H) EIA 48 cm (19 in.) rack, 483 x 42 x 44 mm (19 x 1.65 x 1.75 in.)
    Weight
    Panel 0.54 kg (1.2 lb)
    Ribbon Cables (2) 0.3 kg (0.7 lb)
    The LTC 8600 Series accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboards, keyboard extension kits, receiver/driver units, switcher/followers, code merger units, Allegiant Bilinx Data Interface unit, video ribbon cables, and keyboard expansion units. All accessory products are designed to be installer-friendly and compatible throughout the Allegiant series systems. See the Allegiant Accessories datasheet.

    Images

     
  • Certificates (2)
     
  • Documents (10)
     
  • Software & Support (1)
    Title Type Language
    Allegiant Software Updates MHT
     
 

Accessories

LTC 8805/50 REP POWER SUPPLY FOR 8601,8801,8903 230V

for LTC 8601/50 bay, 220-240 VAC, 50 Hz

Commercial Type No.: LTC 8805/50
Product No.: F.01U.503.564

 

LTC 8610/01 CPU MODULE FOR LTC 8600 SERIES

for LTC 8601 bay

Commercial Type No.: LTC 8610/01
Product No.: F.01U.012.217

 
 
LTC 8059/00 ALLEGIANT MASTER CONTROL SOFTWARE

LTC 8059/00 ALLEGIANT MASTER CONTROL SOFTWARE

Commercial Type No.: LTC 8059/00
Product No.: 4.998.138.357